Specifications

RAID

Multiple arrays configurable with dedicated or global hot sparesRAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, and NRAIDOnline expansion by

  1. Adding new drives
  2. Copying and replacing drives with drives of larger capacity

Automatic background rebuildConfigurable stripe size and write policy per arrayIntelligent drive handling:

  1. In degraded mode: skips irreparable blocks to continue rebuild
  2. In normal operation: data-block verification and repair
Host Interface

2 x SCSI-320 through dual-VHDCI 68-pin SCSI ports; SCSI-160 backward compatible Concurrent I/O commandsTagged command queuing up to 256Variable stripe size per logical driveOptimization setting for random or sequential I/Os

Drive Interface

Eight (8) 1.5Gbps SATA, hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA disk drives16 hot-swappable drive traysAutomatic bad-sector reassignmentDedicated bandwidth to each connected drive

System Components

Redundant, hot-swappable components, designed for no single point of failure

  1. One (1) EonStor® 2U enclosure
  2. One (1) RAID controller module
  3. One (1) 128MB SDRAM DIMM module (pre-installed on the controller module)
  4. Two (2), hot-swappable, redundant, 350W power supply units
  5. Two (2), hot-swappable, redundant, single-fan cooling modules
  6. Eight (8), hot-swappable, drive trays
  7. Two (2) front handles
Management

Front LCD control panel for setup and configuration10/100 BaseT Ethernet for out-of-band managementRS-232C for local access to firmware-embedded utilityFirmware-embedded Java-based RAIDWatch® GUI manager

  1. VT-100 terminal emulation via RS-232C
  2. Telnet access via onboard Ethernet port
  3. Cross-platform, remote administration with SSL
  4. Out-of-band access via Ethernet (GUI-onboard)
  5. Centralized management to monitor and administer multiple RAID units on one screen

SNMP agent support:

  1. SNMP trap event notification with plain-text event message (no MIB file required)
  2. SNMP V2.0 MIB file support with get-and-set commands
Indicators

Onboard alarm is triggered when one of the following modules fails:

  1. RAID controller module
  2. Cooling module
  3. Power supply unit
  4. Hard drive

Notification Processing Center (NPC) for real-time event notification over email, LAN broadcast, or SNMP trapsModule status LED indicators:

  1. Two (2) per drive tray
  2. One (1) per cooling module
  3. One (1) per power supply unit
  4. Three (3) per LCD panel
  5. Six (6) per RAID controller module

Module failure alert through I2C bus Auto switch cache policy and Auto shutdownWhen a RAID controller detects conditions exceeding preset thresholds, the following actions will be exerted to protect the hardware:

  1. Cached data is automatically flushed and the array’s caching mode switches from write-back to write-through mode.
  2. If conditions persist past the preset period of time, auto shutdown of the controller will commence.

All thresholds associated with this mechanism are user configurable and, once a subsystem manager restores the normal operating conditions, the caching mode changes from write-through back to write-back mode.

Intelligent Drive Handling

If two bad blocks occur on two member drives of an array, the integrity of the stored data is endangered. Media Scan, Infortrend’s innovative intelligent drive handling function, retrieves data from the damaged sectors. Media Scan handles low quality drives in both the degraded mode and during the rebuild process. For additional data security, other intelligent drive management features include the transparent resetting of hung hard drives, power-failure management, and bad-drive handling during LD expansion.

Physical/Electrical

Interfaces:
  1. Dual VHDCI, 0.8mm LVDS SCSI host channels
  2. One (1) audio jack RS-232C serial ports (38400, n, 8, 1)
  3. One 10/100M Ethernet port
Power supply:
Two (2) redundant hot-swappable power supplies with PFC
Input: 90~260VAC, 47~63Hz
Output: (Maximum output: 350 Watts)
+12.0V 24A max
+ 5.0V 25A max.
+ 3.3V 20A max.
Dimensions: 248.9D x 128.8W x 81.6H mm
Cooling fan

Two (2) redundant cooling fan modules

Fan speed: 3100rpm
Maximum air flow: 39.55 CFM
Dimensions: 120D x 120W x 32H mm
Environmental Specifications
Operating temperature: 0~40°C
Non-operating temperature: - 40º to 60ºC
Relative humidity: 5~95%, non-condensing
Operating altitude: Operating: 0~10,000 ft
Non-operating: 0~40,000 ft
Dimensions:
  1. 2U enclosure: 88H x 446.2W x 486.5D mm
  2. 2U enclosure with protrusions: 88H x 481.2W x 525D mm
  3. Package: 344H x 600W x 670D mm
System weight (w/o drives):
  1. Net weight: 16kg
  2. Gross weight: 23.5kg