Specifications

JBOD Components
  1. One (1) EonStor 3U JBOD enclosure
  2. One (1) JBOD controller module
  3. One (1) 128MB SDRAM DIMM module (pre-installed on the controller module)
  4. Two (2), hot-swappable, redundant, 460W power supply units
  5. Two (2), hot-swappable, redundant, dual-fan, cooling modules
  6. Sixteen (16), hot-swappable, drive trays
  7. Two (2) front handles
Management
  1. Module status LED indicators
    1. Two (2) per drive tray
    2. Two (2) per cooling module
    3. One (1) per power supply unit
    4. Nine (9) per JBOD controller module
  2. Onboard alarm is triggered when one of the following modules fails:
    1. JBOD controller module
    2. Cooling modules
    3. Power supply unit
    4. Hard drive
    5. Serial port communication with PC hyper-terminal
Host/Drive Interface
  1. Supports 3.5", 1" high hard disk drives
  2. Sixteen (16) hot-swappable drive trays
  3. Single dual loop across 16 drives within enclosure
  4. Auto-negotiate and full-duplex 2Gb FC-AL

Physical/Electrical

Interfaces:
  1. Four (4) SFP sockets that use short-wavelength adapters
  2. One (1) RS-232C (Audio Jack) serial port (38400, n, 8, 1) for diagnosis only
Power Supply Unit (PSU) modules
  1. Two (2) redundant, hot-swappable, 460W, PSU modules with PFC.
INPUT: 90 ~ 260VAC  
47 ~ 63MHz  
OUTPUT: (Maximum output: 460 Watts)
+12.0V 32A max.
+5.0V 25A max.
+ 3.3V 20A max.
Cooling fan

Two (2), redundant, hot-swappable, dual-fan, cooling modules.

Fan speed: 3600rpm
Fan size: 9.7cm
Airflow per cooling module: 61 CFM 460 Watts)
Environmental Specifications
Operating temperature: 5 to 40° C
Non-operating temperature: - 40º to 60ºC
Relative humidity: 10 to 95%, non-condensing
Operating altitude: sea level to 10,000ft
Dimensions:
  1. Without protrusions: 131H x 446.2W x 500D mm
  2. With protrusions: 131H x 485W x 532D mm
  3. Package dimensions: 476H x 592W x 695D mm
System weight (w/o drives):
  1. Net weight:20kg
  2. Gross weight: 32kg