• Overview
  • Features
  • Specifications
  • Accessories

Multi-lane SAS for High Performance

S12S-G1033 adopts SAS technology in its host interface design, aggregating the 3Gbps bandwidth of four (4) physical links into a single 12Gbps high-speed port. With two (2) high-speed SAS host ports, the subsystem overcomes the limitations of its SCSI predecessors. It can not only be scaled up to the maximum of 60 drives with easy cabling but sustain the enhanced performance, high availability and reliability with this scaling.

Smart Scalability with SAS Drives

Through the one SAS expansion port, the subsystem offers ample capacity by connecting to the maximum of four (4) JBODs. The flexible support of both SAS and SATA-II drives allows integrators to configure the capacity as tiered storage for data lifecycle management. For mission-critical and frequently-accessed data, you can choose high-reliability SAS drives. As for near-line backup, distribution, or archival uses, affordable SATA drives will be the ideal fit. The optimal mix of these two kinds of drives can satisfy diverse environment requirements while saving unnecessary expenses.

Monitoring and Management

SANWatch: SANWatch provides all functions necessary to discover, configure, administer, and monitor Infortrend’s RAID arrays. Its unified GUI brings you simplicity in using all the features which enable data protection and high availability. Whether single or many, via Intranet or Internet, the status of your subsystems is always at your fingertips.

Besides the management suite, SANWatch, device status monitoring and management can also done through LED indicators, audible alarms, various event notification methods, LCD panel, and firmware utility.

Features Benefits
2 multi-lane SAS host ports
  1. High bandwidth, provide satisfactory processing efficiency even in transaction-intensive and throughput-demanding applications
  2. sustainable performance even when largely scaled

5th generation, ASIC400 architecture:

  1. Hardware RAID5 + RAID6 engine
 Advanced fault tolerance, ensure data integrity even in multiple drive failure events
Drive interface: 3Gbps SAS disk drives Flexible configuration for tiered storage
Maximum expansion of 4 JBODs (up to 60 drives in total) Scalable ample capacity for data storage

Powerful management suite, SANWatch, support

Easy management and monitoring of your subsystems anywhere through Intranet or Internet
Multiple monitoring methods Real-time problem detection and notification ensures continuous operation

Fault-tolerant hardware

 Redundant PSUs and cooling modules enable high availability
Intelligent firmware functions Maximum protection against hardware failure, ensure data integrity and optimized performance
Host Interface
  1. Two (2) SAS wide port (SFF-8088), each with 12Gbps bandwidth
  2. Concurrent I/O commands
  3. Maximum tagged command queuing: 1024
Drive Interface
  1. Twelve (12) 3 Gbps SAS, hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SAS disk drives
  3. S.M.A.R.T. support
  4. NCQ support
  5. Automatic bad-sector reassignment
  6. Dedicated bandwidth to each connected drive
  7. Drive buffer on/off switch
Controller Single
Form Factor 2U Rack-mount
RAID functionality
  1. Global or Dedicated hot-spare
  2. RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10,30, 50, 60
  3. Online expansion by:
    1. Adding new drives
    2. Copying and replacing drives with drives of larger capacity
  4. RAID migration
  5. Configurable stripe size and write policy per array
  6. Intelligent drive handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
System Components
  1. One(1) RAID controller module
  2. One (1) 512 MB DIMM module (pre-installed module)
  3. Two (2) 350W power supply units
  4. Three (3) redundant, dual-speed cooling modules 
  5. Twelve (12), hot-swappable drive trays
  6. Optional Li-Ion battery backup unit (BBU), life expectancy and charge level aware
Management
  1. Java-based SANWatch management software
  2. COM1 serial port for local access to firmware-embedded utility
  3. COM2 for UPS connection
  4. Automated cache flush and caching mode operation per enclosure status
  5. GUI, Telnet, and SSH system monitoring via Ethernet
  6. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  7. Various event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  8. LCD keypad panel for monitoring and access to all configuration options
  9. Module status LED indicators:
  10. Component presence detection & thermal sensors via I2C bus
Dimensions 88(H) x 446(W) x 490(D) mm
Weight 23.5 kg

Spare Parts

IFT-82S10GE12 SAS to SAS RAID controller module, for ES S12S-G1033 subsystem, 2 x (SASx4) host connector, SAS Exp., 1GB DDR RAM
IFT-82S10GE12M5 SAS to SAS RAID controller module, for S12S-G1033 subsystem, 2 x SAS SFF-8088 host ports, 1 x SAS expansion port., with 512MB DDR RAM
IFT-9272CHandLLCD Left-side forearm handle, for ES 2U series subsystems, LCD panel included
IFT-9272CHandR Right-side forearm handle, for ES 2U series subsystems
IFT-9373CDTray 3.5" Hard disk drive tray
IFT-9272CPSU Power supply module, for EonStor 2U DDR-interface subsystems, 350W capacity
IFT-9272CFanModE Cooling fan module for EonStor 2U DDR-interface subsystems
IFT-DDRESCEM5 512MB DDR RAM DIMM module for ASIC400 Platform.
IFT-9270ASCab RS-232C serial cable, audio-jack to DB9
IFT-9011 Null Modem, DB9 female to DB9 male, wires swapped

IFT-9270CmSASCab2

 SAS external cable, SFF-8088 to SFF-8088, 120cm

Accessories

IFT-9270CmSASCab4 SAS external cable, MiniSAS 4X(SFF-8088) to Infiniband 4X(SFF-8470, thumbscrew type), 120 Centimeters
IFT-9270CUPSCab UPS cable, audio-jack to DB9
IFT-DDRESCEMA 1GB DDR RAM DIMM module for ASIC400 Platform.
IFT-9273CBTE Li-Ion battery cell pack, includes 4 battery cells
IFT-9272CESlide28

Enhanced Slide rail assembly, for ES 2U series subsystem, 21"~28.5" rack depth
IFT-9272CESlide36 Enhanced Slide rail assembly, for ES 2U series subsystem, 25.5"~36" rack depth