• Highlights
  • Specifications
  • Accessories
  1. Dual-active or single controller
  2. 4G FC to SAS disk drives
  3. Eight (8 - R1430) or four (4-G1430) 4G FC host ports
  4. Hardware RAID5 and RAID6 engine by dedicated ASIC400 chipsets
  5. EonPath™ multipathing sotware
  6. SANWatch® storage management software
See details about expansion enclosures:S16S-J1000-R/S (JBOD)
Host-to-Drive Interface Model Configuration SAS Exp. Form Factor
4G FC-to-SAS S16F-G1430 Single 1 3U Rack-mount
RAID Controller
  1. Hardware RAID parity computing
  2. Hardware RAID5 & RAID6 parity computation
  3. Supports RAID 0, 1 (0+1) , 3, 5, 6, 10, 30, 50, 60, and NRAID
  4. RAID Migration
  5. Configurable stripe size and write policy per array
  6. Multiple Global, Dedicated, & Enclosure-specific hot-spares
  7. Intelligent Drive Handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Host Interface
  1. Eight (8-R1430) or four (4-G1430) 4G FC
  2. 4Gb/s via short-/long-wavelength LC-type SFP
  3. Concurrent I/O commands
  4. Tagged command queuing up to 1024 Max
  5. command queue up to 1024
  6. Fault-tolerant host links via onboard bypass
Drive Interface
  1. Sixteen (16) 3.0Gbps SAS, hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SAS disk drives
  3. S.M.A.R.T. and NCQ support
  4. Automatic bad-sector reassignment
  5. Dedicated bandwidth to each connected drive
  6. MUX kits with port selectors for dual-controller access to SATA drives
System Components
  1. Heavy duty 3U enclosure
  2. Dual- (R1430) or Single (G1430) RAID and I/O management controller module
  3. Fault-tolerant modules interfaced through a common backplane
  4. High availability SAS domains to hard drives via expanders and port selectors
  5. One (1) 512MB DDR DIMM module (default, supports up to 2GB in size)
  6. Redundant, hot-swappable 530W power supply units
  7. Redundant, dual-speed cooling modules
  8. Sixteen (16), hot-swappable drive trays
  9. Two (2) forearm handles
  10. Li-Ion, life expectancy-aware battery backup unit (BBU)
Management
  1. COM1 serial port for local access to firmware-embedded utility
  2. COM2 for UPS connection
  3. GUI, Telnet, and SSH system monitoring via Ethernet
  4. Java-based SANWatch software
  5. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  6. Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  7. LCD keypad panel to all configuration options
  8. Event log in reserved space; Administrator's activity log
  9. Variable logical drive options per DIMM size
  10. Module status LED indicators:
    1. Two (2) per drive tray
    2. Seven (7) per controller module
    3. One (1) per power supply unit
    4. One (1) per BBU module
    5. Two (2) per cooling module
  11. Presence detect & thermal sensors via I2C bus

Physical/Electrical

Interfaces
  1. Four (4) SFP host ports for 4Gb/s DAS or SAN connections
  2. One (1) Fast Ethernet management port
  3. Two (2) serial COM port (38400, n, 8, 1)
Power Supply Module

Redundant hot-swappable power supplies with PFC

Input 100VAC at 9A, 240VAC at 4.5A with PFC (auto-switching)
47 to 63Hz
Output (Maximum output: 530 Watts)
+12.0V 32A max.
+ 5.0V 32A max.
+ 3.3V 30A max
Cooling Module
  1. Redundant dual-thermal-fan cooling modules
  2. Maximum air flow
    1. High speed: 90CFM
    2. Low speed: 70CFM
Environmental Specifications
Operating temperature: 5° to 40° C (35° C if battery is applied)
Non-operating temperature: - 40° to 60° C
Relative humidity: 5 to 95%, non-condensing
Operating altitude: Operating: 0 to 10,000 ft
Dimensions
  1. Without protrusions: 131H x 446.2W x 500D mm
  2. With protrusions: 131H x 485W x 532D mm
  3. Package dimensions: 476H x 592W x 695D mm
System weight
  1. Net weight: 34kg
  2. Gross weight: 32kg (without drives)

Spare Parts

IFT-83SF14RE16 Fibre to SAS RAID controller module, for ES S16F-R1430 subsystem, 4 x 4G FC SFP host ports, RAID6
IFT-83SF14RE16M5 Fibre to SAS RAID controller module, for ES S16F-R1430 subsystem, 4 x 4G FC SFP host ports, RAID6, 512MB DDR RAM
IFT-83SF14GE16 Fibre to SAS RAID controller module, for ES S16F-G1430 subsystem, 4 x 4G FC SFP host ports, RAID 6
IFT-83SF14GE16M5 Fibre to SAS RAID controller module, for ES S16F-G1430 subsystem, 4 x 4G FC SFP host ports, RAID 6, 512MB DDR RAM
IFT-9270CHandR Right-side forearm handle for EonStor 3U series subsystems
IFT-9273CHandLLCD Left-side forearm handle for EonStor 3U series subsystems, LCD panel included
IFT-9273CBTE Battery Li-Ion cell pack for EonStor ASIC400 series
IFT-9273ECPSU Power supply module for ES 3U, ASIC400 series subsystem, 530W capacity
IFT-9273ECFanMod Cooling fan module for ES 3U, ASIC400 series subsystems
IFT-9373CDTray (G1430) 3.5" Hard disk drive tray
IFT-9373S1DT2S1S (R1430) 3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2
IFT-9011 Null modem, DB9 female to DB9 male, wires swapped
IFT-DDRESCEM5 512MB DDR RAM DIMM module

Accessories

9273S1N2S1S IFT-9273S1N2S1S HDD MUX board, 2-to-1 SATA MUX conversion, power MOS switch embedded, dual-controller subsystems
IFT-9270AYCab Serial port Y-cable for dual-controller subsystems, 2 audio jacks -to- 1 DB-9; maintenance-free during controller failover
IFT-9270CUPSCab UPS cable, audio-jack to DB-9
IFT-9270CUPSYCab UPS Y-cable, audio jacks to DB-9’s
IFT-9270CSFP4GA01 Agilent Fibre Channel 4.25 / 2.125 / 1.0625 GBd Small Form Pluggable Optical Transceiver, LC, wave-length 850nm, multi-mode
IFT-9270CFCCab01 Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mmx2, 1 meter
IFT-9270CFCCab02 Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mmx2, 5 meters
IFT-9270CFCCab03 Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mmx2, 10 meters
IFT-9273CSlider32 Slide rail assembly, for Enhanced ES 3U/16-bay subsystem, 23"~32" rack depth
IFT-9273CSlider36 Slide rail assembly, for Enhanced ES 3U/16-bay subsystem, 23"~36" rack depth
IFT-DDRESCEMA 1GB DDR RAM DIMM module