• Highlights
  • Specifications
  • Accessories
  1. Expansion enclosure for SAS to SAS RAID systems
    1. SAS drives for high performance and high reliability
    2. SATA drives for low cost and high capacity applications
  2. Highest density, 16 drives in 3U rack space
  3. Redundant or single JBOD controllers
  4. Two (2) SAS 4x wide ports per controller
  5. Diagnostics LED panel
  6. Path redundancy via separate SAS domains( S16S-J1000-R)
Host-to-Drive Interface JBOD Model Corresponding RAID Subsystem(s) Configuration Form Factor
Model Max. Connection
SAS to SAS S16S-J1000-S

S16S-G1030
S16F-G1430
S16E-G1130
A24S-G2130

 4 JBODs Single Expander Controller 3U rack- mount
S16F-G1840 6 JBODs
S24F-G1440 5 JBODs
Host Interface
  1. Two (2) SAS 4x wide ports per controller.
  2. Proprietary enclosure service via in-band methodology
Drive Interface
  1. Sixteen (16) hot swappable SAS disk drives
  2. MUX kits with port selectors for dual-controller access to SATA drives
System Components
  1. Redundant or single JBOD controller configurations
  2. Fault-tolerant modules interfaced through a common backplane
  3. Redundant, hot swappable 530W power supply units
  4. Redundant, dual-speed cooling modules
  5. LED diagnostics panel
Management
  1. Management of multiple enclosures via RAID firmware and/or through GUI
  2. Module status LED indicators:
    1. Six (6) LED on panel (1 service LED and 5 status LEDs)
    2. Two (2) per drive tray
    3. Three (3) per controller module (1 Ready/Failed LED and two (2) Link status LEDs)
    4. One (1) per power supply unit
    5. Two (2) per cooling module
Power Supply Module
Power Requirements
Power Consumption 530W
Input Voltage 100VAC @ 9A
240VAC @ 4.5A with PFC (auto-switching)
Frequency 47-63Hz
Cooling Module
Specifications
Speed High or low rotation speed controlled by firmware proactive mechanisms
Max. Airflow (each module) High speed: 90CFM
Low speed: 70.7CFM
Environmental Specifications
Humidity Operating: 5% to 95% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
Temperature Operating: 0° to 40°C (32°F to 104°F)
Non-operating: -40° to 60°C (-40°F to 149°F)
Altitude Operating: Sea level to 3,658m (12,000 ft.)
Non-operating: Sea level to 12,192m (40,000 ft.)
Dimensions
Dimensions With Forearm Handles (Not including rear-end protrusions) Without Forearm Handles
Height 131mm (5.2 inches) 130mm (5.1 inches)
Width 482.6mm (19 inches) 445mm (17.5 inches)
Length 504.3mm (19.8 inches) 488.2mm (19.2 inches)
System weight
Net Weight S16S-J1000-S 27kg (59.52 pounds)/ S16S-J1000-R 28kg ( 61.73 pounds )
Gross Weight S16S-J1000-S 29.5kg (65.04 pounds)/ S16S-J1000-R 30.5kg( 67.24 pounds)

Spare Parts

IFT-83S10J162 SAS expander controller module, 2 x SAS 4x wide ports
IFT-9270CHandR Right-side chassis ear for EonStor 3U series, LED version subsystems
IFT-9273CHandLLCD Left-side chassis ear for EonStor 3U series, LED version subsystems, with an LED panel
IFT-9273ECPSU Power supply module for ES 3U, ASIC400 series subsystem, 530W capacity
IFT-9273ECFanMod Cooling fan module for ES 3U, ASIC400 series subsystems
IFT-9373CDTray (S16S-J1000-S) 3.5" Hard disk drive tray
IFT-9373S1DT2S1S (S16S-J1000-R) 3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2
IFT-9270CmSASCab3 SAS external cable, MiniSAS 4X(SFF-8088) to Infiniband 4X(SFF-8470, thumbscrew type), 50 Centimeters

Accessories

IFT-9270CSASCab02 SAS external cable, SFF-8470 connectors, 120cm
IFT-9272CDTrayDmy Dummy Drive tray, Type-II bezel
IFT-9273S1N2S1S MUX board, 3.5" HDD, exclusive for SAS 3G drive side dual-controller subsystems, 5V only, Rev. 1.2
IFT-9273CSlider32 Slide rail assembly, for Enhanced ES 3U/16-bay subsystem, 23"~32" rack depth
IFT-9273CSlider36 Slide rail assembly, for Enhanced ES 3U/16-bay subsystem, 23"~36" rack depth